Anyway, under the passenger side of the dash in the heater box there is the imprint of a slot or "door" about 10" long and about 1.5" wide. Take a razer knife and cut around the door and it will come out. Slip up your cabin air filter into the hole. The bottom of the filter will serve as the door to the box.
When it comes to your automotive servicing parts, Repco knows what you need, with over 100 years of experience in the market. Our car cabin filters offer you the following: An odour barrier. 0.3 micron - capturing tiny particles. Consistent airflow through your cabin filter. Durable filter media.
SOURCE: cabin filter element location. Filter is located behind the glove box. All you need is a screwdriver to replace. 1. Open the glove box and empty to take the weight off the box. 2. On the right side there is a plastic hinge like device held on by one Phillips head screw. Thanks in advance for your help. I sir have successfully made a cabin air filter for these vehicles!! And it actually works and captures all the crud! But stock from tje factory no, they did not issue one. Y'all are more than welcome to drop me a text or phone call anytime. 432- 599-5002. My name is Jay.Yes there is a cover that covers the whole A/C system on the passengers side. You will need to remove that cover, then try to find a 1" wide plastic piece that has 1 screw going through it. You will take the screw out to remove the cover and above that you will see the air filters.
Replacing a cabin air filter on these cars is pretty simple and you only need a couple tools. If you have a T20 torx bit (highly recommended), you can change
.